
Optimised & User-friendly Solutions
BioSecure Positive and Negative Pressure
protection
Why pressure safety is essential in a biogas plant
BioSecure is the overpressure and underpressure safety device from Biogastechnik Süd, developed to provide reliable protection for digesters and gas storage tanks in biogas plants. If the gas pressure in the storage tank rises above the permissible limit, the overpressure safety device prevents damage to the membrane and the tank. If the pressure falls below the minimum value, the under-pressure safety device protects against vacuum damage. BioSecure complies with the relevant standards and is therefore a mandatory component for the safe, compliant operation of biogas plants.
The Biosecure overpressure and underpressure safety device can be activated either mechanically via a biogas storage membrane or via weight-loaded float chambers. The Biosecure housing is made of stainless steel, whilst the float cups and the linkage are made of plastic. We use water as the containment fluid, which is supplemented with antifreeze at low outside temperatures. As an option, an insulating jacket or an electric heating element can be fitted to prevent the water from freezing without the need for antifreeze. The built-in sight glass allows the operation inside the housing to be checked.
Overpressure and Underpressure Protection: How It Works
The Biosecure overpressure and underpressure safety device monitors and regulates overpressure and underpressure in the fermentation tanks of biogas plants. It protects the biogas storage membranes of fermenters, secondary digesters and digestate storage tanks from excessive loads.
The Biosecure has been designed as a safety component within the meaning of the Machinery Directive 2006/42/EC.
However, the level of safety we aim to achieve when operating a biogas plant can only be realised in practice if all necessary measures are taken. It is the operator’s duty of care to promote these measures and to monitor their implementation.
Advantages
Biosecure
- Reliable over- and under-pressure protection: can be operated either pneumatically (under- and over-pressure) or via a mechanical control (e.g. gas bag)
- When used in conjunction with the insulating jacket, no antifreeze is required as a barrier fluid down to – 20 °C.
- No topping up of the barrier fluid is required
- Liquid levels regulate themselves
- Excess condensate drains into the fermentation tank
- Maintenance-free
- A heating element can also be fitted as an option
- Includes a pressure test connection
- Includes a connection for a pressure sensor
Additional equipment (optional):
- Pipe connection kit for substrate pipes
- Pipe connection kit for heating
Variants:
- for an air-supported roof
- for membrane roofs